Physique Chimie · Suivi d’une transformation chimique

Suivi d’une transformation chimique

Tableau d’avancement, avancement maximal, réactif limitant, suivi par pression et par volume de gaz.

Niveau
1ère Bac
Session
Semestre 1
Cours الدرس

I. Système chimique et réaction

Activité

On plonge un ruban de magnésium dans un tube contenant de l’acide chlorhydrique (solution d’ions \(\mathrm{H^{+}}\) et \(\mathrm{Cl^{-}}\)). On observe un dégagement gazeux et le ruban disparaît peu à peu ; une flamme approchée de l’ouverture du tube produit une légère détonation. Une fois la réaction terminée, on ajoute de la soude à la solution : il se forme un précipité blanc d’hydroxyde de magnésium.

1) Quel gaz s’est formé ? Quel ion est apparu dans la solution ?

2) Quels sont les réactifs ? Les ions chlorure participent-ils à la réaction ?

3) Écrire l’équation de la réaction.

Solution :

1) Le dihydrogène (détonation) ; les ions magnésium \(\mathrm{Mg^{2+}}\) (précipité avec la soude). 2) Le magnésium et les ions \(\mathrm{H^{+}}\) ; les ions chlorure sont spectateurs. 3) Voir ci-dessous.

Définitions

Un système chimique est l’ensemble des espèces présentes, avec leur état physique et leur quantité de matière. Lors d’une transformation, il passe d’un état initial à un état final. La transformation est modélisée par une réaction dont l’équation est ajustée (conservation des éléments et des charges).

\(\displaystyle \mathrm{Mg}_{(s)}+2\,\mathrm{H^{+}}_{(aq)}\longrightarrow\mathrm{Mg^{2+}}_{(aq)}+\mathrm{H_{2}}_{(g)}\)

II. Avancement et tableau d’avancement

Avancement

L’avancement \(x\) (en \(\mathrm{mol}\)) décrit l’évolution : un réactif de coefficient \(a\) perd \(a\,x\) moles, un produit de coefficient \(c\) en gagne \(c\,x\).

Équation\(\mathrm{Mg}\)\(+\ 2\,\mathrm{H^{+}}\)\(\longrightarrow\ \mathrm{Mg^{2+}}\)\(+\ \mathrm{H_{2}}\)
État initial\(n_{1}\)\(n_{2}\)\(0\)\(0\)
En cours\(n_{1}-x\)\(n_{2}-2x\)\(x\)\(x\)
État final\(n_{1}-x_{max}\)\(n_{2}-2x_{max}\)\(x_{max}\)\(x_{max}\)

Réactif limitant

La réaction s’arrête quand un réactif, le réactif limitant, est épuisé ; l’avancement vaut alors \(x_{max}\) (la plus petite des valeurs qui annulent la quantité d’un réactif). Si tous les réactifs sont épuisés en même temps, le mélange est stœchiométrique.

Application 1

On fait réagir \(6{,}0\ \mathrm{mmol}\) de magnésium avec \(8{,}0\ \mathrm{mmol}\) d’ions \(\mathrm{H^{+}}\).

1) Calculer \(x_{max}\) et trouver le réactif limitant.

2) Donner la composition finale du système.

Solution :

1)

\(6{,}0-x=0\) donne \(6{,}0\ \mathrm{mmol}\) ; \(8{,}0-2x=0\) donne \(4{,}0\ \mathrm{mmol}\). Donc \(x_{max}=4{,}0\ \mathrm{mmol}\) : les ions \(\mathrm{H^{+}}\) sont limitants.

2)

\(2{,}0\ \mathrm{mmol}\) de \(\mathrm{Mg}\) ; \(0\) de \(\mathrm{H^{+}}\) ; \(4{,}0\ \mathrm{mmol}\) de \(\mathrm{Mg^{2+}}\) et de \(\mathrm{H_{2}}\).

Diagramme d’évolution des quantités de matière en fonction de l’avancement

Application 2

On brûle \(0{,}20\ \mathrm{mol}\) de méthane dans \(0{,}50\ \mathrm{mol}\) de dioxygène : \(\mathrm{CH_{4}}+2\,\mathrm{O_{2}}\longrightarrow\mathrm{CO_{2}}+2\,\mathrm{H_{2}O}\).

1) Trouver le réactif limitant et \(x_{max}\).

2) Calculer les quantités finales.

Solution :

1)

\(0{,}20-x=0\) donne \(0{,}20\) ; \(0{,}50-2x=0\) donne \(0{,}25\) : \(x_{max}=0{,}20\ \mathrm{mol}\), le méthane est limitant.

2)

\(0\) de \(\mathrm{CH_{4}}\) ; \(0{,}10\ \mathrm{mol}\) de \(\mathrm{O_{2}}\) ; \(0{,}20\ \mathrm{mol}\) de \(\mathrm{CO_{2}}\) ; \(0{,}40\ \mathrm{mol}\) d’eau.

Application 3

Quelle quantité de dioxygène faut-il pour que le mélange avec \(0{,}20\ \mathrm{mol}\) de méthane soit stœchiométrique ?

Solution :

\(\displaystyle \frac{n(\mathrm{CH_{4}})}{1}=\frac{n(\mathrm{O_{2}})}{2}\ \Longrightarrow\ n(\mathrm{O_{2}})=0{,}40\ \mathrm{mol}\)

Application 4

On plonge \(0{,}27\ \mathrm{g}\) d’aluminium en poudre dans \(100\ \mathrm{mL}\) de solution de sulfate de cuivre (II) à \(0{,}15\ \mathrm{mol\cdot L^{-1}}\) : \(2\,\mathrm{Al}+3\,\mathrm{Cu^{2+}}\longrightarrow2\,\mathrm{Al^{3+}}+3\,\mathrm{Cu}\). \(M(\mathrm{Al})=27\) ; \(M(\mathrm{Cu})=63{,}5\ \mathrm{g\cdot mol^{-1}}\).

1) Calculer les quantités initiales des réactifs.

2) Dresser le tableau d’avancement et déterminer \(x_{max}\).

3) Calculer la masse de cuivre déposé. Le mélange était-il stœchiométrique ?

Solution :

1)

\(\displaystyle n(\mathrm{Al})=\frac{0{,}27}{27}=1{,}0\times10^{-2}\ \mathrm{mol}\) ; \(\displaystyle n(\mathrm{Cu^{2+}})=0{,}15\times0{,}100=1{,}5\times10^{-2}\ \mathrm{mol}\)

2)

Équation\(2\,\mathrm{Al}\)\(+\ 3\,\mathrm{Cu^{2+}}\)\(\longrightarrow\ 2\,\mathrm{Al^{3+}}\)\(+\ 3\,\mathrm{Cu}\)
initial\(1{,}0\times10^{-2}\)\(1{,}5\times10^{-2}\)\(0\)\(0\)
en cours\(1{,}0\times10^{-2}-2x\)\(1{,}5\times10^{-2}-3x\)\(2x\)\(3x\)

Les deux réactifs s’annulent pour \(x=5{,}0\times10^{-3}\ \mathrm{mol}\) : \(x_{max}=5{,}0\times10^{-3}\ \mathrm{mol}\).

3)

\(\displaystyle m(\mathrm{Cu})=3x_{max}\times63{,}5=1{,}5\times10^{-2}\times63{,}5\approx0{,}95\ \mathrm{g}\)

Oui : les deux réactifs sont entièrement consommés.

Remarque

Au cours d’une transformation chimique, les éléments et la masse totale se conservent : la masse des produits formés est égale à la masse des réactifs consommés.

III. Suivre une transformation

1. Par mesure de pression

Activité

Dans un erlenmeyer fermé (volume de gaz \(V=1{,}0\ \mathrm{L}\), \(T=293\ \mathrm{K}\), \(P_{0}=1\,013\ \mathrm{hPa}\)), on fait réagir le mélange de l’application 1. Un capteur mesure la pression :

Suivi d’une transformation par mesure de pression : erlenmeyer fermé et capteur

\(t\ (\mathrm{s})\)\(0\)\(30\)\(60\)\(100\)\(150\)\(200\)\(300\)\(400\)
\(P\ (\mathrm{hPa})\)\(1\,013\)\(1\,047\)\(1\,069\)\(1\,087\)\(1\,099\)\(1\,105\)\(1\,109\)\(1\,110\)

1) Pourquoi la pression augmente-t-elle ?

2) L’avancement vaut \(x=\frac{(P-P_{0})V}{R\,T}\). Calculer \(x\) à la fin de la réaction. Comparer à \(x_{max}\).

Solution :

1)

Le dihydrogène formé s’ajoute à l’air du récipient.

2)

\(\displaystyle x_{f}=\frac{\left(1\,110-1\,013\right)\times10^{2}\times1{,}0\times10^{-3}}{8{,}314\times293}\approx4{,}0\times10^{-3}\ \mathrm{mol}=x_{max}\)

Courbe de l’avancement de la réaction en fonction du temps

Remarque

Le temps de demi-réaction \(t_{1/2}\) est la durée nécessaire pour que \(x\) atteigne la moitié de sa valeur finale ; ici, \(t_{1/2}\approx50\ \mathrm{s}\) (lu sur la courbe).

2. Par mesure du volume de gaz

On recueille le gaz dans une éprouvette retournée sur l’eau. Sa quantité de matière vaut \(n=\frac{V_{gaz}}{V_{m}}\).

Eudiomètre : suivi d’une réaction par le volume de gaz formé

Application 5

Une réaction \(\mathrm{Zn}+2\,\mathrm{H^{+}}\longrightarrow\mathrm{Zn^{2+}}+\mathrm{H_{2}}\) produit \(72\ \mathrm{mL}\) de dihydrogène (\(V_{m}=24\ \mathrm{L\cdot mol^{-1}}\)) ; le zinc a entièrement disparu.

1) Calculer l’avancement final.

2) En déduire la masse de zinc initiale (\(M=65\ \mathrm{g\cdot mol^{-1}}\)).

Solution :

1)

\[x_{f}=\frac{0{,}072}{24}=3{,}0\times10^{-3}\ \mathrm{mol}\]

2)

\[m(\mathrm{Zn})=3{,}0\times10^{-3}\times65\approx0{,}20\ \mathrm{g}\]

Exercices corrigés تمارين محلولة 12
Exercice 1

Ajuster une équation

Facile

Ajuster : \(\mathrm{H_{2}}+\mathrm{O_{2}}\longrightarrow\mathrm{H_{2}O}\) ; \(\mathrm{C_{2}H_{6}}+\mathrm{O_{2}}\longrightarrow\mathrm{CO_{2}}+\mathrm{H_{2}O}\).

Afficher la correctionMasquer la correction

\(\displaystyle 2\,\mathrm{H_{2}}+\mathrm{O_{2}}\longrightarrow2\,\mathrm{H_{2}O}\) ; \(\displaystyle 2\,\mathrm{C_{2}H_{6}}+7\,\mathrm{O_{2}}\longrightarrow4\,\mathrm{CO_{2}}+6\,\mathrm{H_{2}O}\)

Exercice 2

Tableau d’avancement

Facile

On fait réagir \(3{,}0\ \mathrm{mol}\) de dihydrogène et \(2{,}0\ \mathrm{mol}\) de dioxygène : \(2\,\mathrm{H_{2}}+\mathrm{O_{2}}\longrightarrow2\,\mathrm{H_{2}O}\).

Trouver \(x_{max}\), le réactif limitant et la composition finale.

Afficher la correctionMasquer la correction

\(3{,}0-2x=0\) donne \(1{,}5\) ; \(2{,}0-x=0\) donne \(2{,}0\) : \(x_{max}=1{,}5\ \mathrm{mol}\), \(\mathrm{H_{2}}\) limitant. Final : \(0\) de \(\mathrm{H_{2}}\), \(0{,}5\ \mathrm{mol}\) de \(\mathrm{O_{2}}\), \(3{,}0\ \mathrm{mol}\) d’eau.

Exercice 3

Mélange stœchiométrique

Facile

Pour la réaction \(\mathrm{N_{2}}+3\,\mathrm{H_{2}}\longrightarrow2\,\mathrm{NH_{3}}\), quelle quantité de dihydrogène faut-il pour réagir exactement avec \(0{,}50\ \mathrm{mol}\) de diazote ?

Afficher la correctionMasquer la correction

\[n(\mathrm{H_{2}})=3\times0{,}50=1{,}5\ \mathrm{mol}\]

Exercice 4

Volume de gaz et avancement

Facile

Une réaction dégage \(96\ \mathrm{mL}\) de dioxyde de carbone (coefficient \(1\)) ; \(V_{m}=24\ \mathrm{L\cdot mol^{-1}}\). Calculer l’avancement.

Afficher la correctionMasquer la correction

\[x=\frac{0{,}096}{24}=4{,}0\times10^{-3}\ \mathrm{mol}\]

Exercice 5

Fer et ions cuivre

Moyen

On plonge \(0{,}56\ \mathrm{g}\) de fer dans \(50\ \mathrm{mL}\) de sulfate de cuivre à \(0{,}10\ \mathrm{mol\cdot L^{-1}}\) : \(\mathrm{Fe}+\mathrm{Cu^{2+}}\longrightarrow\mathrm{Fe^{2+}}+\mathrm{Cu}\). \(M(\mathrm{Fe})=56\) ; \(M(\mathrm{Cu})=63{,}5\ \mathrm{g\cdot mol^{-1}}\).

1) Calculer les quantités initiales.

2) Trouver le réactif limitant.

3) Calculer la masse de cuivre déposé.

Afficher la correctionMasquer la correction

\(\displaystyle 1)\ n(\mathrm{Fe})=1{,}0\times10^{-2}\) ; \(\displaystyle n(\mathrm{Cu^{2+}})=5{,}0\times10^{-3}\ \mathrm{mol}\)

2) \(x_{max}=5{,}0\times10^{-3}\ \mathrm{mol}\) : les ions \(\mathrm{Cu^{2+}}\) sont limitants.

\(\displaystyle 3)\ m(\mathrm{Cu})=5{,}0\times10^{-3}\times63{,}5\approx0{,}32\ \mathrm{g}\)

Exercice 6

Combustion du propane

Moyen

On brûle \(0{,}10\ \mathrm{mol}\) de propane : \(\mathrm{C_{3}H_{8}}+5\,\mathrm{O_{2}}\longrightarrow3\,\mathrm{CO_{2}}+4\,\mathrm{H_{2}O}\), avec \(0{,}40\ \mathrm{mol}\) de dioxygène.

Trouver le réactif limitant et la quantité de dioxyde de carbone formé.

Afficher la correctionMasquer la correction

\(0{,}10-x=0\) donne \(0{,}10\) ; \(0{,}40-5x=0\) donne \(0{,}080\) : \(x_{max}=0{,}080\ \mathrm{mol}\), le dioxygène est limitant.

\[n(\mathrm{CO_{2}})=3x_{max}=0{,}24\ \mathrm{mol}\]

Exercice 7

Précipitation

Moyen

On mélange \(10\ \mathrm{mL}\) de nitrate d’argent à \(0{,}20\ \mathrm{mol\cdot L^{-1}}\) et \(10\ \mathrm{mL}\) de chlorure de sodium à \(0{,}10\ \mathrm{mol\cdot L^{-1}}\) : \(\mathrm{Ag^{+}}+\mathrm{Cl^{-}}\longrightarrow\mathrm{AgCl}\).

Calculer \(x_{max}\) et la quantité d’ions argent restant.

Afficher la correctionMasquer la correction

\(\displaystyle n(\mathrm{Ag^{+}})=2{,}0\times10^{-3}\) ; \(\displaystyle n(\mathrm{Cl^{-}})=1{,}0\times10^{-3}\) ; \(\displaystyle x_{max}=1{,}0\times10^{-3}\ \mathrm{mol}\) ; \(\displaystyle n(\mathrm{Ag^{+}})_{f}=1{,}0\times10^{-3}\ \mathrm{mol}\)

Exercice 8

Mesure de pression

Moyen

Dans un flacon fermé (volume de gaz \(0{,}50\ \mathrm{L}\), \(T=300\ \mathrm{K}\)), une réaction produit un gaz (coefficient \(1\)) ; la pression passe de \(1\,000\) à \(1\,100\ \mathrm{hPa}\). \(R=8{,}314\ \mathrm{J\cdot mol^{-1}\cdot K^{-1}}\).

Calculer l’avancement final.

Afficher la correctionMasquer la correction

\[x=\frac{10\,000\times5{,}0\times10^{-4}}{8{,}314\times300}\]

\[x\approx2{,}0\times10^{-3}\ \mathrm{mol}\]

Exercice 9

Temps de demi-réaction

Moyen

Le suivi d’une réaction donne : \(x=1{,}2\ \mathrm{mmol}\) à \(1\ \mathrm{min}\), \(2{,}0\ \mathrm{mmol}\) à \(2\ \mathrm{min}\), \(2{,}6\ \mathrm{mmol}\) à \(3\ \mathrm{min}\), et \(x_{f}=3{,}6\ \mathrm{mmol}\).

Entre quels instants se situe le temps de demi-réaction ? En donner une valeur approchée.

Afficher la correctionMasquer la correction

\(\frac{x_{f}}{2}=1{,}8\ \mathrm{mmol}\) est atteint entre \(1\) et \(2\ \mathrm{min}\) ; par interpolation : \(t_{1/2}\approx1+\frac{1{,}8-1{,}2}{2{,}0-1{,}2}\approx1{,}75\ \mathrm{min}\).

Exercice 10

Aluminium et acide

Difficile

On fait réagir \(0{,}27\ \mathrm{g}\) d’aluminium avec un excès d’acide chlorhydrique : \(2\,\mathrm{Al}+6\,\mathrm{H^{+}}\longrightarrow2\,\mathrm{Al^{3+}}+3\,\mathrm{H_{2}}\). \(M(\mathrm{Al})=27\ \mathrm{g\cdot mol^{-1}}\) ; \(V_{m}=24\ \mathrm{L\cdot mol^{-1}}\).

1) Calculer \(x_{max}\).

2) Calculer le volume de dihydrogène obtenu.

Afficher la correctionMasquer la correction

\(\displaystyle 1)\ n(\mathrm{Al})=1{,}0\times10^{-2}\ \mathrm{mol}\) ; \(\displaystyle 1{,}0\times10^{-2}-2x_{max}=0\Rightarrow x_{max}=5{,}0\times10^{-3}\ \mathrm{mol}\)

\(\displaystyle 2)\ n(\mathrm{H_{2}})=3x_{max}=1{,}5\times10^{-2}\ \mathrm{mol}\) ; \(\displaystyle V=0{,}36\ \mathrm{L}\)

Exercice 11

Eau oxygénée

Difficile

La décomposition totale de \(20\ \mathrm{mL}\) d’eau oxygénée, \(2\,\mathrm{H_{2}O_{2}}\longrightarrow2\,\mathrm{H_{2}O}+\mathrm{O_{2}}\), libère \(120\ \mathrm{mL}\) de dioxygène (\(V_{m}=24\ \mathrm{L\cdot mol^{-1}}\)).

Calculer la concentration de l’eau oxygénée.

Afficher la correctionMasquer la correction

\(\displaystyle x_{f}=\frac{0{,}120}{24}=5{,}0\times10^{-3}\ \mathrm{mol}\) ; \(\displaystyle n(\mathrm{H_{2}O_{2}})=2x_{f}=1{,}0\times10^{-2}\ \mathrm{mol}\) ; \(\displaystyle C=\frac{1{,}0\times10^{-2}}{0{,}020}=0{,}50\ \mathrm{mol\cdot L^{-1}}\)

Exercice 12

Fer et soufre

Difficile

On chauffe \(2{,}8\ \mathrm{g}\) de fer avec \(2{,}0\ \mathrm{g}\) de soufre : \(\mathrm{Fe}+\mathrm{S}\longrightarrow\mathrm{FeS}\). \(M(\mathrm{Fe})=56\) ; \(M(\mathrm{S})=32\ \mathrm{g\cdot mol^{-1}}\).

Trouver le réactif limitant et la masse de sulfure de fer formé.

Afficher la correctionMasquer la correction

\(\displaystyle n(\mathrm{Fe})=0{,}050\) ; \(\displaystyle n(\mathrm{S})=0{,}0625\ \mathrm{mol}\) ; \(\displaystyle x_{max}=0{,}050\ \mathrm{mol}\ (\) fer limitant \(\displaystyle )\) ; \(\displaystyle m(\mathrm{FeS})=0{,}050\times88=4{,}4\ \mathrm{g}\)